|
3887 |
Click on the above
image for a full
view ... |
|
| A combination kit which incorporates a gas torch and includes the following accessories: pencil flame head, hot blower head, flat flame head, soldering head, four bits, hot knife, soldering iron sponge, reel of solder and storage box. This kit is ideal for engineers and hobbyists alike. The gas torch is butane gas (lighter fuel) powered and is therefore extremely portable. Ideal for field service engineers where power points may not always be close to hand. The soldering head contains a platinum catalyst which heats the bit without a flame! Gas will burn when first ignited, but flame will extinguish when catalyst is up to temperature. The torch head may be used for engineering, jewellery and model making work. The flame is adjustable and reaches a temperature of 1300°C (2370°F).Note: Gas torch is supplied unfilled. Refilling is achieved using Maplin butane refill UP73Q. |
| Overall dimensions of gas torch (accessories not fitted): 168mm x 19mm dia. Accessories and spare soldering iron bits are available, see below. |
| WARNING: Extreme care must be exercised when using this gas torch, due to the very high temperature of the gas flame. |
|
